Discontinued Products

(version 3.0) Liebert Nform Enterprise Edition

Liebert Nform is a network communications system that will enable you to leverage the distributed monitoring capabilities of your network connected equipment. This software solution combines full-scale monitoring with cost-effective deployment through the use of the existing network infrastructure. It is both scalable and adaptable so it can grow as your systems expand and business needs change.

(version 3.0) Liebert Nform Professional Edition

Liebert Nform is a network communications system that will enable you to leverage the distributed monitoring capabilities of your network connected equipment. This software solution combines full-scale monitoring with cost-effective deployment through the use of the existing network infrastructure. It is both scalable and adaptable so it can grow as your systems expand and business needs change.

Albér MPM-100 Battery Monitoring System

Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. Continuous data center monitoring potential problems using parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.

Avocent AMX Analog High Performance KVM Sw​itches

The Avocent AMX Analog High Performance KVM switch provides real-time user access to all major server platforms and serial devices.

Avocent AV 3008, AV 3016 and AV 3200 Digital KVM Switches

Built for small datacenters and remote/branch office environments, the AV 3008, AV 3016 and AV 3200 models of KVM over IP switchs provide consolidated, streamlined access to server resources.

Avocent LongView 1000 Extender

Avocent LongView 1000 extenders let you place a keyboard, monitor, mouse, speakers, microphone and serial port up to 1,000 feet away from your computer or Avocent KVM switch.

Avocent LongView 430/830 Extenders

The Avocent LongView™ 430/830 extenders allow you to place connected computers up to 500 feet away with a single CAT-5 cable. Even at a distance, you will still have direct control of your keyboard, monitor, mouse, speakers, microphone and serial devices without impacting performance.

The extenders support environmental applications where the physical separation of the user and the computer is a requirement. These applications include harsh environments that are not suitable for the normal operation of the computer or secure applications to minimize tampering, information theft, system damage and unauthorized software installation.

Avocent LongView IP KVM Extenders

Digital Extension Solutions

Avocent® LongView™ IP KVM extension solutions enable you to separate and locate users and their computers anywhere on an existing LAN. This improves data security, removes computers from harsh environments and addresses limited workspace environments.

All of the LongView IP digital extenders eliminate the distance limitations found in analog extenders while maintaining an “at-the-PC” experience for the user. Convenient IP connectivity allows you to select the computer location and provide access to high-quality VGA or DVI video and audio from anywhere in your building. The LongView IP digital extenders also support a comprehensive range of periperals including DVI-I, CD audio, USB mass storage, keyboard and mouse and other USB devices.

Deploying this solution is fast and easy. Simply attach one of the LongView IP transmitters to the computer, plug the peripherals into the receiver at the user location (desk) and connect both units to the local network.

 

Avocent PM 1000 Rack PDU

The Avocent Power Management Distribution Units (PM PDUs) include single-phase and three-phase models that support strip-level metering, outlet-level metering or outlet-level metering and switching. This advanced family of rack PDUs includes horizontal and vertical models for a variety of rack configurations in branch and remote offices.

Avocent PM 2000/3000 Rack PDUs

The Avocent Power Management Distribution Units (PM PDUs) include single-phase and three-phase models that support strip-level metering, outlet-level metering or outlet-level metering and switching. This advanced family of rack PDUs includes horizontal and vertical models for a variety of rack configurations in branch and remote offices. The Avocent PM 2000 and PM 3000 PDUs support outlet-level metering and switching capability to provide data center professionals the tools they need to monitor, measure, reduce and manage their growing power consumption costs of IT equipment. Thresholds can be created to allow data center teams to know before problems occur and minimize downtime caused by overloaded circuits. With the ability to support up to 22 kW and support for C19 outlets, the PM 2000 and PM 3000 PDUs are well positioned to support the high rack density found in organizations today. These PDUs include advanced features that consist of a built-in network port for access to the browser interface, daisy chain ports for easy installation and expansion and support for external, environmental sensors. For a total solution, the PM 1000/2000/3000 devices can be used with other Avocent appliances for integrated IP access to the attached equipment, along with power measurement and/or control for improved remote management.

Avocent SwitchView 100 Desktop KVM Switches

The Avocent SwitchView™ Desktop KVM switches enable you to use a single keyboard, monitor and mouse to seamlessly access multiple PCs without the expense and waste of valuable desktop real estate.

You no longer need dedicated KVM equipment for each machine.

This offering is made up of the SwitchView™ 100, SwitchView™ MM and the SwitchView™ DVI switch series.

 

Avocent SwitchView Digital KVM Switches

 

The SwitchView™ IP remote access device is a digital switch that includes an on-board Web interface that gives small to midsize businesses convenient, secure, browser-based access to existing analog KVM switches and servers.

The SwitchView™ switch lets you select DES, 3DES, AES or 128-bit SSL encryption for keyboard, mouse and video. The device’s Java™ video viewer supports Internet Explorer, Mozilla, Firefox and Netscape. Plus, the device is flash upgradeable for fast and easy updates.

With this solution, you also utilize the Dambrackas Video Compression® (DVC) algorithm for high-quality video and gain a local port for convenient connectivity to an existing analog KVM switch or server.

 

Avocent SwitchView DVI KVM Desktop Switches

Desktop KVM switches for high-end graphic applications.

The Avocent SwitchView™ switches enable you to use a single keyboard, monitor and mouse to seamlessly access multiple PCs without the expense and waste of valuable desktop real estate. You no longer need dedicated KVM equipment for each machine.

This offering is made up of the SwitchView™ 100, SwitchView™ MM and the SwitchView™ DVI switch series.

 

Avocent SwitchView MM KVM Desktop Switches

Allows switching between USB and PS/2 systems for multimedia applications.

The Avocent SwitchView™ MM Desktop KVM switches enable you to use a single keyboard, monitor and mouse to seamlessly access multiple PCs, without the expense and waste of valuable desktop real estate.

You no longer need dedicated KVM equipment for each machine.

 

Avocent SwitchView SC 100/200 Secure Desktop KVM Switch

The Avocent® SwitchView™ Secure KVM switches are field-proven, secure, KVM-switching solutions for government agencies. SwitchView Secure solutions allow users to switch safely between computers operating at different classification levels from a single set of peripherals, providing continuous access to critical data. With multiple security features, the Avocent KVM Secure Switch design prevents the transfer of data between the connected computers, ensuring data security isn’t compromised.

SwitchView Secure switch products are National Information Assurance Partnership (NIAP) Common Criteria validated to EAL 4 augmented with ALC_FLR.2 (designated as EAL 4+).

 

Avocent SwitchView SC 400/500 Secure KVM Switch

The Avocent® SwitchView™ Secure KVM switches are field-proven, secure KVM switching solutions for government agencies. SwitchView Secure solutions allow users to switch safely between computers operating at different classification levels from a single set of peripherals, providing continuous access to critical data. With multiple security features, the Avocent KVM Secure Switch design prevents the transfer of data between the connected computers, ensuring data security isn’t compromised.

SwitchView Secure switches are National Information Assurance Partnership (NIAP) Common Criteria validated to EAL 4 augmented with ALC_FLR.2 (designated as EAL 4+).

 

DCF Optimized Rack System

The DCF optimized 19″ data center rack system from Vertiv integrates computing hardware, power management technologies and peripherals in your data center. It provides superior design and flexibility, allowing optimal data center equipment performance and easy installation.

DCM Modular Data Center Racks and Enclosures

 

DCM modular racks are the basic building block for any IT space. These server rack cabinets are available in a variety of heights, widths and depths, and feature tool-less accessories and multiple door options to meet data center design needs. The racks are designed to optimize air flow and maximize useful mounting space. DCM racks are compatible with Liebert XDR rear door cooling, Liebert MB busway, and the Vertiv family of rack PDUs.

The DCM rack provides a fully assembled aluminum extruded frame with a patented T Slot, offering many quick mount options. It is offered in heights of 42U and 45U, widths of 600mm, 700mm and 800mm and depths of 1000mm, 1100mm and 1200mm. Racks may be ordered and delivered with installed Liebert MPH or Liebert MPX rack power distribution, or Liebert GXT3 or Liebert PSI rackmount UPS.

Configurations specifically designed to meet size, airflow and cable management requirements for Cisco® Nexus 7010 and 7018 Switches are also available.

 

Liebert AC3

Liebert Autochangeover Controllers monitor running and stand-by environmental units for proper operation. The AC3 Autochangeover Controller provides coordinated control in systems with redundant environmental units. When an alarm is detected in a Running unit, the AC3 enables a Standby unit and responds to the unit in alarm as programmed. The AC3 controller also can balance the run times of the units, by rotating the Running and Standby assignments.

Liebert AC4 Controller

Autochangeover controllers are ideal for coordinated control of systems with redundant data center infrastructure equipment, such as multiple environmental units or pumps. When the controller detects an alarm in an operating device, a standby device is enabled and the device in alarm is either disabled or left operating as configured.

Liebert AC8 Controller

Autochangeover controllers are ideal for coordinated control of systems with redundant data center infrastructure equipment, such as multiple environmental units or pumps. When the controller detects an alarm in an operating device, a standby device is enabled and the device in alarm is either disabled or left operating as configured.

Liebert AP400

The Liebert AP400 Series true on-line uninterruptible power supply eliminates almost all power disturbances that can corrupt data and damage equipment. During a power failure, the AP400 will provide up to 15 minutes of battery back-up at full load, longer with additional battery cabinets or racks.

Liebert APM UPS

The row-based Liebert APM is a transformerless, on-line UPS that allows quick and easy capacity increases with modular power scalability – no additional floor space required. The UPS operates with high efficiency – up to 94% at loads of 50-100%.

Liebert Challenger 3000 with Advanced Microprocessor

Liebert Challenger 3000 provides complete control of temperature, humidity and air filtration. The unit offers an extremely compact footprint, ideal for facilities where space is at a premium. All critical components are front-accessible, so the unit may be corner-installed or installed flush against other equipment.

Liebert Challenger 3000 is available in 10.5 and 17.5 kW (3 and 5 tons) capacities, 60 Hz and 50 Hz models. Air cooled, water cooled, glycol cooled, GLYCOOL™ and chilled water configurations. Upflow and downflow models available.

Liebert Challenger ITR, Row-Based Precision Cooling System, 23 and 33kW

Liebert Challenger ITR is a horizontal airflow precision cooling unit that fits within a row of equipment racks. It draws hot air in through the extended rear door and supplies chilled conditioned air through a low profile, cold aisle discharge plenum.

Liebert Challenger ITR is available in nominal 23kW or 33kW capacity, 60Hz. 50Hz models also available. Air-cooled, water-cooled, glycol-cooled, GLYCOOL, chilled water and split system configurations. The horizontal airflow pattern is suitable for raised or non-raised floors.

Liebert CommSure Redundant UPS Interface

Liebert CommSure redundant UPS interface allows network managers to create their own high availability power system using existing UPS systems. The system eliminates false shutdown signals that occur when separate UPS systems are used to power computers with redundant power supplies. Liebert CommSure permits two Liebert UPS systems to function together as a redundant, high availability power system when used with computers with two or more power supplies. The unit assures that computers will continue to operate as long as power is available from one UPS or both. If power is unavailable from either UPS, Liebert CommSure, using Liebert MultiLink software, will automatically shut down your computers in an orderly manner. 50Hz or 60Hz.

Liebert Datacool

This product is discontinued.

Liebert Datawave

This product is discontinued.

Liebert ECA2-E and ECA2-M

The optional ECA2 (Environmental Communications Adapter) allows a dumb terminal or a PC with an RS-232 port to communicate with Liebert Level 0 and Level 10 microprocessor controllers in environmental units. By accessing the ECA2 board through a modem, users can monitor unit status from a remote location, observe alarms, and change set points. A security password can be required for system control, but is not required for status information.

The ECA2 can communicate with up to two Liebert microsprocessor boards using RS-422 (proprietary) links. Each RS-422 link is called a channel. The ECA2 converts the data on each RS-422 channel to an RS-232 signal (ASCII) for transmission to a monitor (local or remote). The RS-232 port on the ECA2 connects to the terminal, PC, or modem, and the cable wiring must comply with the application.

The ECA2 board is field installed in the environmental unit electronics control box, wired to a +5 VDC power supply and to the RS-422 (Proprietary) port of the microprocessor board. This RS-422 connection is made to channel 1 of the ECA2 board; if you connect a second environmental unit, it must be wired to channel 2 of the ECA2 board.

Liebert ENV-DO and Liebert iCOM-DO Environmental Discrete Output Interface Card

Liebert environmental interface cards are easily installed in selected Liebert precision cooling systems to provide contact closure monitoring and reporting of system operation. The cards provide contact closure outputs, and report status and major alarm conditions to an existing Building Management System, I/O or alarm panels, and auto-dialer devices. Liebert environmental discrete output interface cards provide 16 individual contact-closure outputs for status and major alarm conditions of microprocessor-controlled Liebert precision air conditioning systems.

Liebert FS Flywheel Energy Storage

An efficient and reliable alternative to standard battery systems used with a UPS. Liebert FS may be used as the sole back-up DC energy storage device or in conjunction with conventional battery strings and /or generator sets. Flywheels may be paralleled to provide for higher power requirements, longer runtimes, or for N+1 redundancy. This product is discontinued.

Liebert GXT2 On-Line UPS, 500VA-3000VA

This product is discontinued.

Liebert GXT2 On-Line UPS, 6kVA and 10kVA

Liebert GXT2 6- and 10-kVA UPS systems provide true on-line protection in the smallest cabinets in their capacity range. The UPS systems offer internal batteries, unlimited extended external batteries, and internal bypass capability, resulting in continuous uptime for the connected equipment. Multiple power output configurations allow quick connection of protected loads.

Designed for rack-mount or tower modes, Liebert GXT2 is available in a 6kVA, 4U model; and a 10kVA, 6U model. Both models are available with output of 120/208V, 220V, 230V, 240V. Dual output voltage units can provide 240/120, 208/120, 230/115, 220/110, or 200/100 VAC.

Liebert GXT2 6000 and 10000VA Power Assurance Package: This full coverage package includes all of the elements needed to ensure the highest level of protection for your electronic equipment: Liebert GXT2 UPS; Battery Kits; Startup 7×24; 5 Year Service Contract; (1) Preventative Maintenance Visit; On Site Service Support; 100% Parts Coverage, including Internal Batteries; 4 Hour Customer Response; 24 X 7 Emergency Service.

Liebert Himod

Liebert Himod precision cooling system provides precise temperature regulation, humidity control and air filtration in a high-efficiency, space-saving, low-noise unit. It provides the temperature regulation, humidity control and air filtration required by electronic equipment in computer rooms, telecommunications sites and other high tech environments. Featuring total front access for installation and service, Liebert Himod fits easily into tight spaces. Liebert Himod is available in capacities from 28-42kW (8-12 tons), 60Hz. Air-cooled, glycol-cooled, GLYCOOL and Dual Cool configurations are available in upflow and downflow models.

Liebert HPC-S Free Cooling Chiller, 192-362kW

The Liebert HPC-S provides chiller support for small to mid-sized computer rooms, with cooling capacities of 192kW (55 tons), 285kW (81 tons) and 362kW (103 tons).

Liebert ICS Industrial Cooling

Your process control equipment has to be tough in order to operate under harsh conditions, and the air conditioner maintaining the environment must match this durability. The Liebert ICS is designed for the physical needs of industrial sites, with rugged and serviceable components to ensure continuous operation.

ICS also has the intelligence that microprocessor technology provides. This advanced system provides close temperature and humidity control, improving the operating conditions for your electronic process control equipment.

Liebert IntelliRack Multiplexing Unit

The IntelliRack is a powerful multiplexing device that allows a Liebert UPS of any size to communicate with virtually unlimited number of computers. The IntelliRack unit has five Intellislots for MultiPort 4 cards that can be connected to as many as four computers each. An IntelliRack unit with five MultiPort 4 cards installed will notify up to 20 computers of power failure and low battery conditions. A built-in bridging capability permits daisy-chaining IntelliRack units together, accommodating a virtually unlimited number of computers – limited only by the capacity of the UPS. When a power failure or low battery arises in the UPS, the IntelliRack sends notifications to all systems connected to the IntelliRack. One example of a connected system is a network of computers running Liebert’s MultiLink shutdown software.

Liebert Isolation Transformer

This product is discontinued.

Liebert LDS Series

The Liebert Direct Reading Leak Detection System includes leak detection cable connected to a module to provide a direct distance reading in feet or meters. A module with display included is the LDS1000. A module without a display is the LDS750. Either of these modules can send a signal (RS-485) to a remote display, the LDS1000D. Also included are outputs for Liebert SiteScan (RS-422), proprietary) and an analog signal (4-20mA). The module has two (2) alarm relays: leak detected and cable fault. These contacts may be wired in parallel for a summary alarm. Alarm relays can be supervised (de-energized for alarm) or unsupervised (energized for alarm). The display can be latched until acknowledged or it can be continuously updated. User options, including cable length, are selected by DIP switches.

The leak detection cable (LT500) is available in lengths of 10 to 25 feet. Total cable length can range from 10 to 2000 feet. The cable system can include a leader cable from the module to the first leak detection segment, and weighted sections and leader cables can be used in the system. A cable end terminator is always included to complete the circuit. The cable is installed to a clean, dry surface using a pair of adhesive clips at six (6) foot intervals.

Liebert Micro SmartSwitch

This product is discontinued.

Liebert MPH Managed Rack PDUs

MPH is a flexible rack PDU – a perfect solution for growing IT operations. The PDU offers control to the receptacle level, as well as monitoring of the strip and environmental input options, such as rack temperature and humidity. MPH offers the industry’s leading operating temperatures, ensuring availability even in the harsh environment at the back of the rack.

Liebert MR1

The Liebert MR1 Mini-Remote monitors the operating status and controls the operation of your Liebert Environmental unit. It serves as a remote user interface, supplementing the unit-front
controls.

Liebert MultiLink Automated Shutdown Software

Automated shutdown software provides reliable Liebert UPS system monitoring, preventing unexpected server shutdowns and minimizing downtime. The data center monitoring software provides unattended, orderly shutdown for one computer or many, and is especially effective with large server farms. Available for most popular operating systems, Liebert MultiLink has full event management and displays UPS instrumentation on screen.

Liebert Nfinity 4-20kVA

This product is discontinued.

Liebert Nform Business Edition Centralized Monitoring Software V3

Liebert Nform is a network communications system that will enable you to leverage the distributed monitoring capabilities of your network connected equipment. This software solution combines full-scale monitoring with cost-effective deployment through the use of the existing network infrastructure. It is both scalable and adaptable so it can grow as your systems expand and
business needs change.

Liebert NPower On-Line UPS 30-130kVA

This product is discontinued.

Liebert NX (10-30kVA)

Liebert NX is a mid-sized, three-phase uninterruptible power supply (UPS) system that delivers complete, centralized data center power protection. Designed to meet the high availability power needs of a wide variety of IT applications and equipment, the UPS combines compact size, advanced operating features and low cost of ownership. The 120/208-Volt, three-phase version of the Liebert NX is available in four sizes including 10kVA, 15kVA, 20kVA and 30kVA capacities.

Liebert NX UPS, 225-600kVA/kW

The Liebert® NX™ UPS provides high efficiency in both Eco-mode and double conversion mode, higher availability with hot-rectifier operation, and flexibility with SoftScale capacity upgrades. This power protection solution offers a dynamic response, avoids potential battery damage while procuring fast seamless transitions, and still delivers significant energy savings.

Liebert NX UPS, 40-200kVA

The Liebert NX is a true on-line, double conversion, three-phase UPS system with Softscale™ technology that provides a scalable solution for growing data centers. The UPS allows growth from 40 to 60 to 80 kVA, and from 80 to 100 to 120 kVA. The UPS may also be paralleled for additional capacity or for redundant operation.

Liebert OpenComms WebCard

The OpenComms Web Card delivers SNMP (Simple Network Management Protocol) and Web support to the UPS in which it is installed. The card is designed for use in a Liebert UPS with an Intellislot bay. This includes the PowerSure Interactive, UPStation GXT, UPStation GXT2U, and Nfinity. The OpenComms Web Card requires an Ethernet network connection and supports both 10Mbit and 100Mbit communication speeds and either half or full duplex. The OpenComms Web Card enables in-band communication via the Web from computers running web browser software. The OpenComms Web Card enables in-band communication with network management systems (NMS) via SNMP. The OpenComms Web Card integrates with Liebert’s MultiLink™ software to provide notification for unattended, graceful operating system shutdown of PCs, servers, and workstations. MultiLink is available for most operating systems.

Liebert PowerSure Interactive

This product is discontinued.

Liebert PowerSure Personal

This product is discontinued.

Liebert PowerSure ProActive

This product is discontinued.

Liebert PowerSure PSI Line-Interactive UPS

This product is discontinued.

Liebert PowerSure Surge II

This product is discontinued.

Liebert Precision Power Center

The Liebert PPC offers the benefits of a custom-tailored power system, with the convenience and cost savings of a pre-packaged, factory-tested unit. Housed in a single, self-contained cabinet, it combines distribution, computer-grade grounding, isolation, and power monitoring to provide the protection your vital computer or communications equipment demands. Available in 15-225 kVA capacity systems for raised floor applications and 15-150 kVA capacities in top-exit models, the PPC offers flexible expansion capabilities to fit growing sites.

Liebert PSA UPS

Economical line-interactive UPS that offers full-featured power protection for small office computers and electronic equipment. Liebert PSA offers unique features and extraordinary performance not normally found in similar products in this price range. ​​​​​​​​​

Liebert PSA4 UPS

The Liebert PSA4 is an economical line interactive UPS technology designed with the features you need and provides reliable power protection for home office network devices and personal entertainment equipment.

Liebert PSI

Liebert PSI is a compact, line-interactive UPS system with flexible design, incorporating buck/boost automatic voltage regulation technology.

Liebert PSS Surge Protection Strip

This product is discontinued.

Liebert PST4 UPS

The Liebert PST4 is an offline UPS designed to provide reliable power protection for desk top equipment home office computer and network, and home entertainment equipment.

Liebert RAC2-8

Liebert Autochangeover Controllers monitor running and stand-by environmental units for proper operation.

The Liebert RAC2-8 remotely controls from two to eight environmental units. Each unit is assigned to a Zone (room) from 1 to 4. In Zone 1, the largest room, the temperature and humidity can be monitored. The common alarm output from each unit is monitored and annunciated by the RAC2-8. Up to 20 system alarms can be stored with time and date stamp. All alarms are latching and must be manually cleared.

The most important control functions are Autochangeover, Autosequencing, and Standby Testing. Each unit can be assigned a Running or Standby status.

Liebert RCM Series

The Liebert RCM contact monitor displays customized alarm indication for any dry contact input from data center cooling, power and UPS systems, including Liebert units. This remote system continuously surveys the most critical support equipment and instantly alerts users to alarm conditions. The unit monitors up to four digital inputs.

When the RCM receives an alarm signal, a piezoelectric siren sounds and the LED illuminates for the corresponding contact point (1 through 8). A text interface to a video terminal or PC emulating a terminal session is used to configure the operating parameters, and can remain connected to receive user-programmed alarms messages. In addition to monitoring alarm signals from locally-connected equipment, the RCM8 can also dial out via modem to: remote computer; another RCM acting as a repeater; numeric pager; or alphanumeric pager. The RCM8DO features 8 additional contact-closure outputs that mimic the state of the alarm LEDs. Up to four RCM8 units can be connected in a local, multi-point monitoring configuration. This gives added flexibility to monitor up to 32 contact points. The RCM8 also communicates with the Liebert SiteScan centralized monitoring system.

Liebert RDC

Unlike standard Liebert Precision Power Centers (PPCs) and Liebert FPC, the Liebert RDC has no internal isolation transformer and requires 4-wire-plus-ground input from a Liebert PPC or other transformer. By separating the Liebert PPC transformer and subfeed breakers from the panelboard function, Liebert was able to create an extremely compact package. It fits the area of a standard 24” raised-floor tile while permitting removal of adjacent floor tiles. This conserves precious floor space and allows maximum installation flexibility. The system is available in multiple input and output voltages in 60Hz and 50Hz models.

Liebert RDC Remote Distribution Cabinet

Packaged Distribution in a Compact Cabinet

The Liebert Remote Distribution Cabinet (RDC) extends PDU functionality by packaging 168 poles (four complete 42-pole inline panelboards) in a stand-alone cabinet that fits the area of a standard 24” x 24” raised-floor tile. The system is available in multiple input and output voltages in 60Hz and 50Hz models.

 

Liebert RPMP

The Liebert remote power monitor panel (RPMP) provides a better way to monitor your critical power systems, allowing you to respond quickly to alarms and out-of-spec conditions that could jeopardize your electrical operations. The RPMP monitors and displays information for any one critical component within an electrical power system:
•Switchboard distribution panels
•Diesel generators
•Ups systems
•Motor generator systems
•Other essential electrical equipment

Liebert Series 300

This product is discontinued.

Liebert Series 600

This product is discontinued.

Liebert Series 610 On-Line UPS, 225-1000kVA

This product is discontinued.

Liebert Series SGH

Engineered for cost-effective, efficient performance, Series SGH humidifiers are designed for quick installation, simple operation, easy maintenance and servicing, energy efficiency, cleanliness and reliability.

Liebert SiteNet Integrator and Load Control Module

The SiteNet® Integrator monitors and controls various network devices such as UPS Systems, Environmental Control Systems, and Site Security Devices. Two output contact closures control external devices. With an optional SiteNet® Integrator Load Control Module (LCM), the Integrator (Ethernet version) allows remote network control of up to six connected loads. The SiteNet® Integrator uses Simple Network Management Protocol (SNMP) to communicate status information contained in a Management Information Base (MIB) to your Network Management System (NMS).

Liebert SiteNet SNMP Manager

The Liebert SiteNetÆ MultiPort 4 provides easy-to-install protection for up to five computers connected to a single UPS. The computers can simultaneously monitor the UPS status – for example, utility power failure or low battery.

Liebert SiteScan 2000W, SiteScan 2W

SiteScan 2000 for Windows is a full-featured software package designed to monitor critical support equipment. The software includes programs which run on a Workstation computer and other programs called Function Blocks (FBs) which reside in individual control modules. The control modules are installed at or near the local point of interface. These modules are networked together and usually communicate with the Workstation through a single gateway module (normally a SiteGate-232, SiteGate-ETH, or a DCLAN) over telephone lines. This combination of software and hardware allows the implementation of a system-wide monitoring system.

The human operator communicates with each control module network, called a CMnet, through a Workstation. The Workstation software receives information from the modules and processes it so that it can be viewed from the perspective of all locations being monitored: a group of buildings in a complex, an individual building, a floor within that building, an individual zone, or an individual piece of critical support equipment. When the equipment level is reached, the operator is communicating directly with the Function Block in the module which is monitoring the
displayed equipment. This is the most local point of interface, and the operator can quickly assess the performance of that particular equipment and take whatever action is required.

Liebert SiteTrap

SiteTrap for Windows is a software package designed to generate SNMP traps and SMTP email. Messages are communicated over an Ethernet network. The SiteTrap application works with the ASCII file write action in Alert. The SiteTrap software will monitor the ASCII file created by Alert for data. When data (alarms & events) are written to the ASCII file, SiteTrap will extract the data from the file and process the message for sending.

Liebert Tele2

The Liebert TELE2 remotely controls for two InteleCool units. Up to 20 system alarms can be stored with time and date stamp. All Alarms are latching and must be manually cleared.

The most important control functions are Autochangeover and Autosequencing. Each unit can be assigned a Running or Standby status.

Autochangeover turns on the Standby unit if an alarm is detected. The Running unit (with alarm) will be turned off if that control option is selected. Each unit will return to its previous status when the alarm is manually cleared.

Autosequencing balances unit run-times by changing the Standby unit to Running (and the Running unit to Standby) at programmed time intervals. Other control functions include Manual Override, Emergency Power Operation, Power Failure Mode, Password, and Programmable Delays.

Liebert UP Station D

The Liebert UPStation D provides continuous, conditioned power to microcomputers and other data processing equipment. Upon generation, AC power is clean and stable. However, during transmission, it may be subject to load variations or accidents which cause power problems like low voltage, voltage spikes, or complete power failure. These problems may interrupt computer operations, cause data loss, or even damage equipment.

Liebert UP Station GXT

Congratulations on your choice of the Liebert UPStation GXT™ Uninterruptible Power System (UPS). It provides conditioned power to microcomputers and other sensitive electronic equipment.
Upon generation, AC power is clean and stable. However, during transmission and distribution it may be subject to voltage sags, spikes, or complete power failure which may interrupt computer operations, cause data loss, or even damage equipment. The UPStation GXT™ protects equipment from these disturbances.

Liebert UPStation GX

This product is discontinued.

Liebert UPStation GXT, 10kVA

This product is discontinued.

Liebert UPStation S

This product is discontinued.

Liebert XDF

Extreme density electronic equipment is turning up in many non-traditional spaces — spaces without the benefit of computer room air conditioning to provide cooling for the generated heat loads. This rack-based equipment must be protected with the same level of air, power and security support as a conventional computer room, but with the economies of scale and price in mind.

Liebert XDF™ is high density cooling integrated into a secured rack enclosure, providing the benefits of big room support in a cost-effective package. Optimized horizontal air circulation cools the protected equipment, both in standard mode and in backup ventilation mode. Control and monitoring are accomplished with the cabinet-mounted Liebert iCOM control system. In addition, optional Liebert UPS, advanced power strips and remote monitoring systems are available to customize the level of support to individual equipment needs.

Liebert XDK-W

Blade servers and other rack-based, extreme density IT equipment require a high level of cooling, power and security support. The Liebert XDK-W meets this challenge with a proven integrated rack enclosure solution that creates a protective environment for these critical electronic components.

Liebert XDP (without ICOM)

This product is discontinued.

Liqui-tect Two Channel Leak Detection System

Monitoring and Reporting of Leak Detection in Two Different Zones

Liebert Liqui-tect two-channel leak detection provides data center monitoring for two different areas with direct-read at the control unit location, as well as the ability to communicate with Liebert SiteScan Web centralized monitoring system or a building management system.
Liebert Liqui-tect direct-read leak detection system has two independent channels to monitor two different areas. Each channel can monitor up to 5,000 feet of Liebert LT500Y leak detection cable. 60Hz or 50Hz.

The system may be used to detect leaks from:

  • Glycol, condenser water, and chilled water cooling piping
  • Humidification feed water piping
  • Condensate pumps and drains
  • Unit and ceiling auxilliary drip pans
  • Overhead piping

 

NetSure ITM with eSure Technology

48 VDC UPS, 70 kW to 280 kW

The NetSure™ ITM lowers the cost of data center design, operation and management. This 48 V direct current solution is a row-based DC UPS that delivers simple, scalable and highly efficient data center power protection in 70 kW modules. Up to four DC UPS modules can be installed together for 280 kW of total power.

PowerSure UPS

This product is discontinued.

Vertiv MPH2 MPHB1824

Vertiv MPH2 Managed Rack PDU offerings deliver remote monitoring and control capabilities in a range of models. The Vertiv MPH2-B provides basic power monitoring. Available in a range of form factors, each MPH2-B models provides metering at the input and branch level.

Vertiv MPX Adaptive Rack PDU – “Elementary” Branch Receptacle Modules

MPX is the most responsive and adaptive rack PDU available. With MPX rack PDU technology, you can respond to rack equipment changes and dynamic capacities by leveraging hot-swappable modular output power, hot-swappable modular communications and modular input power. The MPX-E provides basic power distribution without measurement and control. An upgrade to modular power distribution with measurement on the input is available by adding the appropriate output modules.

Vertiv MPX Adaptive Rack PDU – with “Branch Monitoring” Receptacle Modules

MPX is the most responsive and adaptive rack PDU available. With MPX rack PDU technology, you can respond to rack equipment changes and dynamic capacities by leveraging hot-swappable modular output power, hot-swappable modular communications and modular input power. The Liebert MPX-B delivers modular power distribution with measurement on the input to each output module. An upgrade or downgrade is possible by adding the appropriate output modules.

Vertiv MPX Adaptive Rack PDU – with “Receptacle Managed” Branch Receptacle Modules

Vertiv MPX is the most responsive and adaptive rack PDU available. With MPX rack PDU technology, you can respond to rack equipment changes and dynamic capacities by leveraging hot-swappable modular output power, hot-swappable modular communications and modular input power. The MPX-R delivers modular power distribution with measurement on the input at the branch, module and receptacle level . The MPX-R also offers remote management of the PDU and the ability to power cycle individual outputs.

Back to Top