Tech Plan 16 Hour Electrical Safety Course

16 Hour Electrical Safety Course

This electrical safety course will provide the student with the information needed to comply with the latest OSHA regulations and requirements regarding electrical safety training for “qualified electrical workers”. The students will have an understanding of the hazards associated with working on or around electricity and to identify the most effective ways to minimize the risks associated with the hazards.

Tech Plan Acceptance Testing

Acceptance Testing

Nearly 70 percent of early equipment failures can be traced to design, installation or startup deficiencies. That’s why it’s so important to protect your plant’s investment in new equipment or systems with acceptance testing. This check of electrical power systems and components after startup uncovers and corrects problems that would otherwise lead to larger, costly issues in the future.

Tech Plan Aperture Software

Aperture Software

Aperture software delivers real-time view of data center assets, enabling companies to manage complex physical infrastructures including equipment, space, power, cooling, network and storage.

Tech Plan Arc Flash Studies

Arc Flash Studies

An up-to-date arc flash study helps mitigate hazards of injury and death by calculating the limited and restricted approach boundaries inside which workers must use appropriate personal protective equipment.

Tech Plan Avocent Data Center Management Support Specialist (DCM-SS)

Avocent Data Center Management Support Specialist (DCM-SS)

The Data Center Management Partner training programs focus on DSView Management Software, supported products and best practices for installation and configuration.

Tech Plan Avocent DSView Management Software Access and Control

Avocent DSView Management Software Access and Control

This course offers an in-depth introduction to Avocent data center management software. This course provides hands-on experience in installation, configuration and management best practices for DSView software. A brief overview of Rack Power Manager will also be available.

Tech Plan Avocent Hardware Appliances – Product Operation

Avocent Hardware Appliances – Product Operation

This course provides an introduction to Avocent data center hardware appliances with serial over IP, KVM over IP, power control and service processor management capabilities. Labs will provide a hands-on experience for each product family and illustrate best practices presented during the lectures.

Tech Plan Avocent Universal Management Gateway – Product Operation

Avocent Universal Management Gateway – Product Operation

This course combines lectures, discussions, demonstrations and hands-on lab exercises on the Avocent Universal Management Gateway appliance.

Tech Plan Battery Remote Monitoring

Battery Remote Monitoring

Utilize a UPS and battery monitoring system and qualified battery monitoring specialists to guarantee the highest level of reliability. Battery monitoring equipment and battery monitoring specialist assess the condition of your DC power system around the clock, increasing mean time between failures (MTBF) by more than double when compared to preventive maintenance alone.

Tech Plan Battery Service with Ntegrated Monitoring

Battery Service with Ntegrated Monitoring

Your UPS system relies on fully functioning batteries. Knowing when UPS battery failure is imminent allows you to repair or replace in order to avoid costly downtime. The only way to gain this knowledge is through continuous monitoring of your batteries. By combining regular, on-site battery service with remote monitoring and maintenance, you can significantly improve system availability through early detection of potential problems, and rapid response to battery defects and degradation.

Tech Plan Circuit Breaker Upgrades and Replacements

Circuit Breaker Upgrades and Replacements

Circuit breakers play a critical role in protecting the people and equipment in your data center, and are integral in limiting the damage should a fault occur. But like all electrical components, circuit breakers can wear out and require an upgrade or replacement. By replacing your aging circuit breakers, you will lower your maintenance requirements and reduce the safety risk to your personnel.

Tech Plan Commissioning

Commissioning

Vertiv experienced commissioners maximize your return by delivering improved availability, enhanced safety, increased efficiency, and reduced operational costs.

Tech Plan Custom or Multiple Vertiv Product Classes

Custom or Multiple Vertiv Product Classes

Customer Training Services at the Vertiv Academy can develop custom Instructor Led Classes to fit most customer needs, to include First Responder Classes for Multiple UPS Systems or Combinations of UPS Systems, Distribution Systems, Battery Training, Battery Testing or Monitoring Solutions.

Tech Plan Data Center Planner Administration and Operations

Data Center Planner Administration and Operations

This course covers all aspects of the Data Center Planner capabilities.

Tech Plan Design Engineering and Installation Services

Design Engineering and Installation Services

Designing the right DC power system and choosing the right batteries and UPS equipment are critical to providing optimalsupport for your facility. Engaging design-engineering services upfront when you are considering expanding your DC power needs will ensure you have the right configuration for optimal performance.

Tech Plan Distribution Assurance Package

Distribution Assurance Package

Even when your IT staff is working at capacity, there’s no need to leave business-critical power unmanaged. By combining leading rack PDU technology, expert service and support, and a five-year protection plan, you’ll know your data center has the power it needs to support business-critical applications.

Tech Plan Electrical Assessment

Electrical Assessment

Data centers are dynamic environments that need to be carefully managed to ensure uptime. Electrical assessments are vital tools that help you make informed decisions that enhance the performance and availability of your data center. You will come away with the ability to identify gaps in electrical equipment maintenance, evaluate electrical system design per current IT needs, improve IT system availability, and plan for additional IT capacity.

Tech Plan Electrical Safety Training

Electrical Safety Training

Inherent dangers exist with the operation, maintenance, and repair of electrical equipment. Electrical hazards such as arc flash and arc blast can result in serious injury or death to electrical workers. With proper safety training, your employees are prepared to protect themselves, their co-workers, and your critical infrastructure.

Tech Plan Generator Preventive Maintenance for Data Centers

Generator Preventive Maintenance for Data Centers

Your UPS and battery backup systems are essential to keeping business-critical equipment online during power loss, but that is only a short-term solution. Being able to support your data center’s critical load during an extended utility outage means having a backup generator that has been properly maintained.

Tech Plan Grounding Studies

Grounding Studies

The main driver of a ground system study is to protect workers from “step potential” hazards, which result from currents that generate high enough voltages to become lethal at distances as short as one human step. To eliminate these hazards, Vertiv’s ERS engineers will do a grid and ground potential analysis and will perform other relevant measurements and modeling to optimize the design of a ground system to effectively shunt the fault current to the earth, away from workers and equipment.

Tech Plan Integrated Switchgear Services

Integrated Switchgear Services

During an interruption to your primary power supply, you rely on your UPS to maintain power to critical equipment and systems. But that plan only works if your integrated switchgear successfully transfers the load. Vertiv’s integrated switchgear services ensure the proper installation, operation, and maintenance of switchgear components so your electrical infrastructure supports high availability of your data center.

Large Vortex 200A Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & theory). This training also includes how to utilize the system controller, system adjustments, and basic trouble clearing. If the LMS1000 is embedded in the system, an additional 3 days of training is required.

Tech Plan Liebert EXL: First Responder

Liebert EXL: First Responder

This course introduces the learner to the correct and safe operations of the eXL product line and how to identify and report problems with the eXL system. This course covers system introduction, system specifications, theory of operations, system operations, and routine inspections of the eXL using appropriate documentation.

Tech Plan Liebert STS: First Responder

Liebert STS: First Responder

This class introduces the learner to the correct and safe operations of the Static Transfer Switch (STS) system and how to identify and report problems with the STS system. The course covers system introduction, system specifications, theory of operations, system operations, and maintenance.

Tech Plan Liebert UPS Preventive Maintenance

Liebert UPS Preventive Maintenance

Vertiv Liebert UPS units are designed for reliability, but they do contain components that must be proactively serviced to ensure proper functionality if needed.

Tech Plan Liebert VSD Upgrade Service

Liebert VSD Upgrade Service

Load demand in your data center changes all the time. But fan speed and airflow from your legacy computer room air conditioning (CRAC) system likely remain constant. What’s more, fan speed is likely set to accommodate peak loads, which rarely exist. As a result, you’re using energy you don’t need and running up costs. Liebert variable speed drive (VSD) upgrade service allows you to match motor speed to changing load demand, reducing energy costs without compromising data center performance.

Tech Plan Life-Extension Services

Life-Extension Services

Aging electrical equipment requires more maintenance and is more likely to fail than a newer system. It could even pose serious safety risks. However, replacing a worn down or obsolete electrical distribution system asset is no minor or inexpensive task. Vertiv’s complete range of life-extension services helps you take advantage of the latest technology without incurring high replacement costs.

LMS1000 Monitoring System Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & theory). This training also includes how to access the monitor locally and via web, configuring channels, file transfer, circuit card description, and basic trouble clearing.

Tech Plan Load Flow and Power Factor Studies

Load Flow and Power Factor Studies

Load flow studies identify and correct power system issues, such as overloads, load imbalance, harmonic problems, poor power factor or other operational issues.
A power factor study can identify how effectively you are using electrical power. By improving your power factor you can boost system capacity, improve voltage to equipment, and reduce power losses. Vertiv’s power system engineers can help you identify the issues behind a poor power factor and provide recommendations for correction.

Tech Plan Low Voltage Circuit Breakers Course

Low Voltage Circuit Breakers Course

This course introduces the student to different types of breaker construction, important breaker data plate information and how the various types of circuit conditions (faults and overloads) should affect the protective functions of the circuit breaker. The proper operation of power circuit breakers, including racking interlocks of draw out style equipment, will be explored in detail. The course covers various causes of breaker failure, safety issues and steps for getting back on line safely.

Tech Plan Motor Control Operations and Troubleshooting Course

Motor Control Operations and Troubleshooting Course

This class presents a logical approach to troubleshooting electrical control systems. Common motor control circuits and motor diagnostic techniques will be discussed. Diagram analysis for troubleshooting will be practiced.

Tech Plan NERC Compliance Services

NERC Compliance Services

Achieving compliance with North American Electric Reliability Corporation (NERC) requirements takes knowledge of ever-changing and complex regulations. These regulations require utilities and similar facilities to implement an ongoing, systematic program to test, maintain, and document the performance of protection scheme devices that impact the Bulk Electric System (BES).

Tech Plan NetSure 211 Training Course

NetSure 211 Training Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & Theory). This training also includes how to utilize the system controller locally & via web, system adjustments, file transfer, and basic trouble clearing.

Tech Plan NetSure 502 Training Course

NetSure 502 Training Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & theory). This training also includes how to utilize the system controller locally & via web, system adjustments, file transfer, and basic trouble clearing.

NetSure 701 Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & theory). This training also includes how to utilize the system controller, system adjustments, and basic trouble clearing. If the LMS1000 is embedded in the system, an additional 3 days of training is required.

Tech Plan NetSure 710 Course

NetSure 710 Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50/50 hands-on & theory). This training also includes how to utilize the system controller locally & via web, system adjustments, file transfer, and basic trouble clearing.

Tech Plan NetSure 721 Training Course

NetSure 721 Training Course

Detailed technical training includes proper use of the supporting documentation and system theory of operation (50%/50% hands-on & theory). This training also includes how to utilize the system controller locally & via web, system adjustments, file transfer, and basic trouble clearing.

Tech Plan NetSure 801 Course

NetSure 801 Course

Detailed technical training includes proper use of the supporting product documentation, and the theory of operation (50/50 hands-on & theory. This training also includes how to utilize the system controller, system adjustments, and basic trouble clearing. If the LMS1000 is embedded in the system, an additional 3 days of training is required.

Tech Plan NetSure 802 Course

NetSure 802 Course

Detailed technical training includes proper use of the supporting product documentation, and the theory of operation (50/50 hands-on & theory). This training also includes how to utilize the system controller, system adjustments, and basic trouble clearing. If the LMS1000 is embedded into the NetSure system, an additional 3 days of training is required.

Tech Plan OSHA 1910/NFPA 70E Electrical Safety

OSHA 1910/NFPA 70E Electrical Safety

This electrical safety course will provide the student with the information needed to comply with the latest OSHA regulations and requirements regarding electrical safety training for “qualified electrical workers.” The students will understand the hazards associated with working on or around electricity and to identify the most effective ways to minimize the risks associated with the hazards.

Tech Plan OSHA 1910/NFPA 70E Electrical Safety with Hands-On

OSHA 1910/NFPA 70E Electrical Safety with Hands-On

This course is designed to provide those personnel involved with the operation and maintenance of a power
distribution system the knowledge, skills, and abilities to meet the NFPA 70E training requirements to be considered a “qualified
electrical worker” in accordance with Chapter 1, and to meet the NFPA 70E Chapter 2 maintenance requirements.

Tech Plan Partial Discharge Testing

Partial Discharge Testing

When an electrical failure happens, the results can be catastrophic. Most electrical failures occur because of insulation breakdown due to small electrical sparks known as partial discharge. Vertiv’s partial discharge (PD) testing and monitoring provide early warning of impending failure. Through data collection and analysis you are able to make strategic decisions about repairing or replacing your electrical equipment.

Tech Plan Partial Discharge Testing for Cables

Partial Discharge Testing for Cables

Partial discharge (PD) testing provides critical information about the quality of cable insulation and its impact on your critical facility. If your medium- and high-voltage cable system has voids, gaps, or other defects, it’s vulnerable to PD. Left unchecked, these small electrical sparks can erode the insulation, eventually leading to unplanned outages. PD testing for cables helps you prioritize your maintenance resources and repair or replace cables before this failure occurs.

Tech Plan Partial Discharge Testing for Switchgear

Partial Discharge Testing for Switchgear

Partial discharge (PD) testing provides critical information about the quality of switchgear and its impact on your critical facility. Your medium-voltage switchgear is vulnerable to PD if it has voids, gaps, or other defects. PD can also occur on the surface of insulators. Left unchecked, these small electrical sparks erode insulation and lead to unplanned outages. PD testing for switchgear helps you prioritize maintenance resources and take action before this failure occurs.

Tech Plan Permanently Mounted Sensors

Permanently Mounted Sensors

Partial discharge (PD) testing plays a critical role in the health of your electrical assets. But some equipment is hard to access or unsafe to open while energized, making testing a challenge. With permanently mounted sensors, it’s possible to conduct online partial discharge (OLPD) testing without exposing workers to danger or shutting down your critical facility. Testing is safer and more efficient, and you get the critical information you need to optimize your electrical assets.

Tech Plan Power Assurance Package

Power Assurance Package

Managing your small, remote, or dispersed mission-critical IT sites is a major challenge. While outages are not an option, neither is sacrificing your busy IT staff to set up and maintain UPS systems. Vertiv’s Power Assurance Package delivers convenient and cost-effective support for power delivery to your small IT sites.

Tech Plan Power Quality Studies and Harmonic Analyses

Power Quality Studies and Harmonic Analyses

Dips, spikes, surges, and momentary outages can damage your critical equipment and systems, or cause them to malfunction. Not only do these outages cost you money, but they may be creating unsafe conditions or other serious problems for your critical facility. A power quality study and harmonic analysis helps ensure smooth, reliable electrical energy identifying the source and nature of these disturbances.

Tech Plan Power System Reliability Studies

Power System Reliability Studies

Risk analysis and reliability studies are essential tools for the design of power systems within critical, continuous-process facilities. Power system reliability studies provide the information necessary to upgrade and maintain your power delivery infrastructure. The results of the studies focus on reducing operating costs, improving efficiency, increasing reliability, and improving system maintainability.

Tech Plan Project Management

Project Management

Critical facility infrastructure projects are nothing if not complex. From planning and design through system installation and startup, managing the countless aspects of complex projects demands focus and expertise. To ensure the success of your infrastructure project, trust Vertiv to provide comprehensive project delivery services throughout the project life cycle.

Tech Plan Relay Design and Integration

Relay Design and Integration

In the event of a fault, protective relays safeguard electrical systems, equipment, and people. Replacing aging electromechanical (EM) relays with digital ones is fast, cost-effective, and delivers a host of benefits if designed and integrated properly. Reaping the full benefits of digital relay technology requires time and skill to appropriately design and integrate.

Tech Plan Relay Upgrades and Replacements

Relay Upgrades and Replacements

Keeping up with the rapid advances in technology and the increasing demand for improved power and reliability is a challenge for today’s electrical asset managers. Relay upgrades and replacements allow you to replace your obsolete protection system and take advantage of the advancements in protection technology without the expense of installing new switchgear.

Tech Plan Repair Services

Repair Services

As electrical equipment ages, components begin to wear and insulation deteriorates. This eventually leads to failure that can cost you millions unless you can quickly identify the problem, troubleshoot, and repair. Properly repaired assets increase system availability and improve performance.

Tech Plan Safety Audits

Safety Audits

Staying abreast of the changing regulatory requirements for safety in your critical facility can be a challenge that requires assistance from an external resource. You don’t want to risk possible fines, penalties, and dangers of non-compliance. By working with experienced professionals to assess the safety of your facility, you’ll get the information you need to bring your physical infrastructure and work practices into compliance and protect your business and employees.

Tech Plan Short Circuit and Coordination Studies

Short Circuit and Coordination Studies

Every time you expand, reconfigure, add a load, or upgrade your electrical distribution system, you challenge its reliability. Short circuit and coordination studies help manage these complexities by ensuring protective devices are properly set and coordinated to quickly isolate a failure. These studies give you a better understanding of current electrical distribution system operation, along with information you need to improve protection for equipment, personnel, and your business as a whole.

Tech Plan Single-Line Diagrams

Single-Line Diagrams

If your facility is like most, equipment and loads are continually added or removed in small increments, constantly changing your electrical infrastructure. The impact of these changes is not always apparent until some part of the system becomes overloaded or exhibits other problems. Keeping your single-line diagram up to date provides a road map that enables proper protection and system reliability, and is necessary for NFPA 70E compliance.

Tech Plan Spare Parts and Spare Parts Management

Spare Parts and Spare Parts Management

Unplanned downtime can cost your business thousands of dollars a minute and have serious consequences including loss of critical systems, revenue, and customer confidence. An important aspect of ensuring the highest level of availability for your data center is having the right spare parts available when and where you need them.

Tech Plan Spare Parts for Industrial, Utility and Harsh Environment Sites

Spare Parts for Industrial, Utility and Harsh Environment Sites

Make sure you have the parts on hand for every situation.
Your industrial power protection system is designed to operate for
20+ years, but it will need timely part replacements to function properly.
Spare parts kits can be created according to your system age and application environment.

Tech Plan Startup Services

Startup Services

When launching new facilities or adding power equipment to existing ones, you want reassurance that is has been done right before it begins to support your business-critical equipment downstream. Doing so requires experience with new data center installations along with equipment expertise. Knowing what to look for prior to initial energization ensures you won’t inadvertently damage your equipment or create safety hazards that put your business at risk.

Stationary Battery Basics

This course provides the student with a fundamental understanding of stationary battery systems used for supporting mission critical systems.

Tech Plan Thermal Control Optimization

Thermal Control Optimization

Ensuring data center availability relies on having the right cooling components, properly configured to match load demand. Thermal control optimization helps you meet demand for increased capacity, improved efficiency, and overall optimized performance of an integrated infrastructure.

Tech Plan Thermal Preventive Maintenance

Thermal Preventive Maintenance

Thermal management equipment is designed to meet the needs of dynamic heat loads in your data center. Boost system performance and avert potentially costly problems by implementing a preventive maintenance program. Properly trained technicians, following manufacturer recommendations and using OEM parts can have a profound effect on your equipment’s performance and your data center’s availability.

Tech Plan Transformer Services

Transformer Services

Large power transformers are some of the most reliable assets used in electrical power systems. Even so, they can and do fail. Transformer failures can cost you millions in lost production, income and customers. Through regular transformer testing and maintenance, you can uncover developing problems before they escalate. This enables proactive repair that supports system reliability and business continuity.

Tech Plan Transformer Theory and Operation Course

Transformer Theory and Operation Course

This course provides a comprehensive overview of electrical transformers found in the industry. It is targeted to those involved in the installation, operation and maintenance of electrical power systems. The course is a fundamental course covering basic transformer theory, applications and construction. Our instruction will provide the greatest possible exposure to transformer theory, application and construction that can be achieved in one day

Tech Plan Upgrade and Replacement Services

Upgrade and Replacement Services

Adopt a proactive battery and UPS component replacement plan. Based on our experience and extensive industry data, we know that the actual life of your DC power system is almost always shorter than the design life. Replacement and upgrade services center on assessing
your system components’ condition and replacing batteries and UPS equipment before they fail, ensuring your system will always deliver.

Tech Plan UPS and Battery Deployment and Startup

UPS and Battery Deployment and Startup

Getting and keeping the power you need is paramount. Whether you are planning a move to a new facility, have exceeded the maximum load of your system, or recovering from a disaster, you require more power. UPS and Battery equipment rental can provide the solutions you need when you need it.

Tech Plan UPS Full Bank Capacitor Replacement

UPS Full Bank Capacitor Replacement

Your UPS systems use large capacitor banks made up of both DC electrolytic and AC polymeric film capacitors that degrade over time. Proactively replacing a full bank of capacitors is strongly recommended to achieve long service life and avoid unplanned downtime.

Tech Plan Vertiv AM/AG and MiniMate/DataMate Course (PCT105)

Vertiv AM/AG and MiniMate/DataMate Course (PCT105)

This course is dedicated to the Deluxe System 3 and Challenger3000 with AM/AG controls, current small systems (MiniMate2, MiniMate3 w/iCOM and Data Mate) as well as the SRC and CMS products (SRC/CMS are instruction only – No Hands-On). Participants will learn via presentations combined with hands-on training using factory-built simulators. The simulator is constructed with an actual main control board, AM/AG display, fuse board and a temperature / humidity sensor.

Tech Plan Vertiv AM/AG and MiniMate/DataMate Renewal Course (PCT106)

Vertiv AM/AG and MiniMate/DataMate Renewal Course (PCT106)

This course is designed as an online, self-paced review and assessment for the PCT105 course. The materials in the review portion of the online course touch on the major areas of the advanced and graphics controls. This course is broken down into multiple modules with a review assessment at the conclusion of each module.

Tech Plan Vertiv CRV – Row-Based Cooling Product (PCT601)

Vertiv CRV – Row-Based Cooling Product (PCT601)

This course covers the Liebert CRV row-based precision cooling and Smart Row DCX air conditioning products. Participants will engage via lectures, presentations and hands-on training using factory-built simulators constructed with actual main control board, iCOM control, fuse board and temperature / humidity sensor. Topics covered are installation basics, operations, networking, programming, maintenance, service and troubleshooting.

Tech Plan Vertiv Data Center Planner

Vertiv Data Center Planner

Vertiv Data Center Planner software provides a system of record for all of the physical infrastructure equipment, power consumption and device connections in your data center.

Tech Plan Vertiv DS-VS / CW / PDX / PCW with iCOM and Networking (PCT206)

Vertiv DS-VS / CW / PDX / PCW with iCOM and Networking (PCT206)

Focusing on DS-VS / CW / PDX / PCW / Challenger and Smart Row DCR with PDX units with iCOM control, the new MC condenser and other heat rejection devices, students learn through a combination of presentations plus hands-on training using a factory-built simulator. The simulator is constructed with an actual main control board, iCOM control, fuse board and temperature / humidity sensor.

Tech Plan Vertiv DS-VS / CW / PDX / PCW with iCOM and Networking (PCT250)

Vertiv DS-VS / CW / PDX / PCW with iCOM and Networking (PCT250)

Focusing on DS-VS / CW / PDX / PCW / Challenger and Smart Row DCR with PDX units with iCOM control, the new MC condenser and other heat rejection devices, students learn through a combination of presentations plus hands-on training using a factory-built simulator. The simulator is constructed with an actual main control board, iCOM control, fuse board and temperature / humidity sensor.

Tech Plan Vertiv DSE Cooling Products (PCT207)

Vertiv DSE Cooling Products (PCT207)

THIS CLASS IS BY INVITATION ONLY. This course covers the DA unit, Micro Channel Condenser (MC) & new EconoPhase Pumping System (PRE). This is an active class that will incorporate the presentations plus hands-on training using factory built simulators, constructed with actual main control board, iCOM control, fuse board & temperature / humidity sensor. Topics covered are Operations, Programming, Installation Basics, Commissioning/Startup, Maintenance, Service & Troubleshooting.

Tech Plan Vertiv EXL First Responder

Vertiv EXL First Responder

This course introduces the learner to the correct and safe operations of the EXL product line and how to identify and report problems with the EXL system. This course covers system introduction, system specifications, theory of operations, system operations, and routine inspections of the EXL using appropriate documentation.

Tech Plan Vertiv EXL S1 First Responder

Vertiv EXL S1 First Responder

This course introduces the learner to the correct and safe operations of the EXL S1 product line and how to identify and report problems with the EXL S1 system. This course covers system introduction, system specifications, theory of operations, system operations, and routine inspections of the EXL S1 using appropriate documentation.

Tech Plan Vertiv EXM First Responder

Vertiv EXM First Responder

This course introduces the learner to the correct and safe operations of the EXM product line and how to identify and report problems with the EXM system. This course covers system introduction, system specifications, theory of operations, system operations, and routine inspections of the EXM using appropriate documentation.

Tech Plan Vertiv HPC-S Water Chillers (PCT701)

Vertiv HPC-S Water Chillers (PCT701)

THIS CLASS IS BY INVITATION ONLY. This session focuses on the Liebert HPC products with iCOM control. Participants will engage via lecture, presentation and hands-on training using factory-built simulators. Topics covered are operations, programming, installation basics, commissioning / startup, maintenance, service and troubleshooting.

Tech Plan Vertiv iCOM Service Tool for Updating Software (PCT401)

Vertiv iCOM Service Tool for Updating Software (PCT401)

THIS CLASS IS BY INVITATION ONLY. Dedicated session on iCOM software updates, iCOM networking, MC and PR circuit board updates, and Intellislot-based monitoring products. Students will use the laptop and a simulator to network iCOM control and utilize service tool to update software.

Vertiv iCOM-S Supervisory System (PCT450)

THIS CLASS IS BY INVITATION ONLY. The iCOM-S class is an in depth offering covering the iCOM-S Supervisor System. The students will learn installation, programming, maintenance, service and troubleshooting of the iCOM-S system as well as wireless sensors, gateways and Room Editor software. This is a fully tested program, which consists of knowledge base and practical skills.

Tech Plan Vertiv NXL First Responder

Vertiv NXL First Responder

This course introduces the learner to the correct and safe operations of the NXL product line and how to identify and report problems with the NXL system. This course covers system introduction, system specifications, theory of operations, system operations, and routine inspections of the NXL using appropriate documentation.

Tech Plan Vertiv Preventive Maintenance (PCT801)

Vertiv Preventive Maintenance (PCT801)

This class is designed to teach the student routine preventive maintenance, service / repair and troubleshooting techniques used on all Vertiv Thermal Management Systems.

Tech Plan Vertiv Rack Power Manager

Vertiv Rack Power Manager

Rack Power Manager can manage enterprise size PDU deployments with ease, providing access and control capabilities to maintain and configure your PDUs.

Vertiv Thermal Management Equipment Operations (PCT203)

This class covers the operations, programming, and installation basics of the customer’s installed Vertiv Thermal Management Equipment.

Tech Plan Vertiv XD – Xtreme Density Cooling Products  (PCT310)

Vertiv XD – Xtreme Density Cooling Products (PCT310)

THIS CLASS IS BY INVITATION ONLY. Session focuses solely on Vertiv XD high heat-density cooling products. Emphasis is on the pumped refrigerant-based products in Vertiv XD. Water-based products in XD are also presented. The XDIO Smart Card functionality, operation & diagnostics and CANBus node ID assignment procedure will also be covered. Course incorporates lectures with hands-on training using factory-built simulators.

Discontinued.png

Discontinued Training Products

View the whole line of Discontinued Training products that we support.